Sketchbot Update - Stickers and Quotes

Lots of exciting things going on behind the scenes at Sketchbot Studios. First, you'll notice a new masthead at the top of the blog that represents the updated logo. This redesign carries over to a new batch of stickers, which include artwork for each of the 6 planned colourways and the DIY blank version. I'll be including a sticker inside each box. Unfortunately, I have to conceal all the amazing versions until those variants become available (gotta keep the suspense alive!). The good news, everyone gets to follow along with Variant 1, and here's the final artwork:

And, yes, that's a sparkling new URL that will be the official home for the Sketchbot brand. It's currently under construction and I'm working on some killer content for the site. As always, you can continue following the adventures of toy production and other going-ons right here.

The following image represents but a third of the ginormous sticker run I recently had completed by the fine folks at Stickerobot. My design is currently featured as their Sticker of the Week! I highly recommend them for any of your sticker needs - tell 'em Sketchbot sent them your way.

Here's a quick comparison between V.1 and V.2 - the design sorely needed updating, and V.2 is now consistent with the revision to the actual 3d model.

Finally, I've been having lots of back-and-forth conversations with two factories in China, presenting my plans for production and getting those much needed quotes. Financing is going to be challenging, but I will not compromise on quality for my first release. I think all the fans of Sketchbot will appreciate the value that is going into bringing this character off the page and into reality. I'm still shooting for a release before the holidays, so keep sending those positive vibes in our direction!

Honey Nut Cheerios Sci-Fi Spot

SciFi Cheerios "if" Spot from Steve Talkowski on Vimeo.

I worked with Hush on this spot a few weeks ago. My role entailed rigging up and animating the bee character, modeling the honey wand and subtle honey animation, and full lighting of the character. A hero Cheerio was animated landing and bobbing in an imaginary plane, and this was repeated numerous times to fill out the foreground splashing bits of cereal. The spot was composited and colour-corrected in After Effects.

Check out Hush's website for more killer work, including another spot I animated on, Sony Ericsson's "Dance Off"

KickToys Launch Party @ Toyqube

After enduring a hellish 45-minute traffic clusterf*ck on the L.I.E., we finally made it to Flushing for the Kicktoys' Launch Party at Toyqube. There was a great turnout for such a modest show, considering there were only 10 custom pieces on display. Met the entire Kicktoys crew, who are really nice people. Congratulations on the launch, and we are definitely looking forward to some of the newer projects that were displayed on the video monitor. Funny how the ride home took less than 15 minutes!

KickToys Custom Teaser

Here's a little sneak peak of my custom BEit Dude for the Kicktoys launch party this Friday at ToyQube.

New Moon: Interpretations of the Chinese Zodiac @ MPH

Here are my pictures from the My Plastic Heart opening that took place on Friday, April 10th, 2009. Lots of excellent work on display, and it's always a pleasure viewing more customs in person from non-local artists. The show runs thru May 10th, so be sure to stop by if you find yourself in the East Village.

Sketchbot Update - Blueprints Completed

I can't believe it's been six weeks since my last post! I've been incredibly busy, with two back-to-back freelance gigs taking up the majority of that time. Fortunately, I also had the last 7 days off and have spent the entire time focused on completing the Sketchbot turnarounds for all seven planned colourways. This included designing and modeling five additional accessories that will each accompany a unique colour variant. And, for all you customizers out there, I'm also going to do a decent sized DIY blank run as well! This is going to be an ambitious first release, and I can't wait to get the ball rolling with manufacturing. I'll be submitting my blueprints for quotes to see exactly how much this is going to set me back, then - provided the actual cost doesn't give me a heart attack - proceed to green light the start of production.

I also have a collab series with Drilone to complete, and will be doing a custom for Toy Qube's upcoming Kicktoys show in May.

For now, I'll share the turnaround for Sketchbot Variant #1, Pencil Edition. The others will be kept secret until the release date gets closer. Stay tuned for some additional, exciting developments in the near future!

Sketchbot 3d Update

The pencil is back! I really needed to revisit the accessory issue because, really, what good is a sketchbot without his drawing implement?! I had always envisioned numerous art tools that this character would employ, and I see no reason (other than cost) to include a separate hand that is large enough to grasp the super deformed objects. This also affects the various colorways I have in mind. I'll most likely have to do an additional 3d print run, as the vinyl toy will shrink by 10%, and I really don't want the final toy to be less than 4.5". This also gives me the opportunity to finesse the grooves on the arms and legs, as the first 3d print was a bit shallow and required use of a tiny jewelers file to enhance the groove profile to a more desired finish. All of these issues start cropping up as I'm preparing the turnaround blueprints to submit to the factories for quotes. I really need to make sure there is no discrepancy in what I propose, and what I would like the final piece to look like. Lots of work involved before pulling the trigger here, and I'd rather take the time getting it right first time out of the gates as opposed to rushing it out.

NYCC 2009 Wrap Up

It was a tiring three days heading back and forth from Brooklyn to Javitz Center. Saw lots of familiar faces, and many who remembered me and Sketchbot from last year, so that was cool. Everyone loved seeing the revised Sketchbot prototype, and I made some new contacts for working with the manufacturers overseas. Comic Con purchases were extremely minimal for me - two artist's books, one really cool inkjet print from Bob Larkin, and one Ugly Doll action figure from Dave Horvath. Check out this Flickr set for my pictures from the show floor!

Sketchbot Molds, Take 2

After a 2-week hiatus, I was finally able to start thinking about the next step with the Sketchbot prototype pieces - mold making and pulling a few resin casts. Now, I haven't done this since last Summer with the first version of Sketchbot, and I'm hoping to get something together for NYCC (which, incidentally, starts tomorrow). Suffice to say, mold making is not my forte. I don't mind sculpting the initial barriers, but the actual mixing and pouring is the messiest part of this venture. After spending an entire day prepping the pieces, the first molds were done and I proceeded to pour the first test pieces. Bad news - every piece was plauged by air bubbles, existing in both the mold and the casts. Ugh.




Already coming to the conclusion that I'm not going to have anything to show (or sell) by Friday, I figure since I'm already in this mode that I'll simply take another crack at making new molds, this time really paying attention to the seam lines and air vents. This evening, the molds were finished and ready for their test castings. They still exhibited a small amount of bubble holes, but were significantly better than the first run. At this stage, I'm seriously debating on whether or not I'm going to be able to pull off a successful DIY limited edition run, as every piece from here on out will require patching and repairing before painting. The good news? I do have a rock-solid 3d printed prototype that I can shop around and see about having that mass produced professionally. I'll bring those pieces with me to Comic Con, have a good time checking all the stuff out over the weekend, and eventually get a few painted up versions done from this week of tests.



Lots more pictures up on Flickr documenting the week's work.

Sketchbot 3d Prototype - Pieces Finally Arrive!

The Sketchbot 3d printed pieces FINALLY arrived this afternoon. (mental note - USPS "Priority" is an oxymoron)

I am extremely happy with the quality and detail of these! They do require some additional cleanup, and after about an hour of wet sanding to remove the very slight remnants of layering and micro-scratches, they are rock smooth.

The pieces all have a snug fit, though, the more I've been playing around with it, the looser the connections are becoming.

I won't be able to generate molds from this until sometime next week, so please marvel at these photos to tide you over until the next phase begins. :)