New Moon: Interpretations of the Chinese Zodiac @ MPH

Here are my pictures from the My Plastic Heart opening that took place on Friday, April 10th, 2009. Lots of excellent work on display, and it's always a pleasure viewing more customs in person from non-local artists. The show runs thru May 10th, so be sure to stop by if you find yourself in the East Village.

Sketchbot Update - Blueprints Completed

I can't believe it's been six weeks since my last post! I've been incredibly busy, with two back-to-back freelance gigs taking up the majority of that time. Fortunately, I also had the last 7 days off and have spent the entire time focused on completing the Sketchbot turnarounds for all seven planned colourways. This included designing and modeling five additional accessories that will each accompany a unique colour variant. And, for all you customizers out there, I'm also going to do a decent sized DIY blank run as well! This is going to be an ambitious first release, and I can't wait to get the ball rolling with manufacturing. I'll be submitting my blueprints for quotes to see exactly how much this is going to set me back, then - provided the actual cost doesn't give me a heart attack - proceed to green light the start of production.

I also have a collab series with Drilone to complete, and will be doing a custom for Toy Qube's upcoming Kicktoys show in May.

For now, I'll share the turnaround for Sketchbot Variant #1, Pencil Edition. The others will be kept secret until the release date gets closer. Stay tuned for some additional, exciting developments in the near future!

Sketchbot 3d Update

The pencil is back! I really needed to revisit the accessory issue because, really, what good is a sketchbot without his drawing implement?! I had always envisioned numerous art tools that this character would employ, and I see no reason (other than cost) to include a separate hand that is large enough to grasp the super deformed objects. This also affects the various colorways I have in mind. I'll most likely have to do an additional 3d print run, as the vinyl toy will shrink by 10%, and I really don't want the final toy to be less than 4.5". This also gives me the opportunity to finesse the grooves on the arms and legs, as the first 3d print was a bit shallow and required use of a tiny jewelers file to enhance the groove profile to a more desired finish. All of these issues start cropping up as I'm preparing the turnaround blueprints to submit to the factories for quotes. I really need to make sure there is no discrepancy in what I propose, and what I would like the final piece to look like. Lots of work involved before pulling the trigger here, and I'd rather take the time getting it right first time out of the gates as opposed to rushing it out.

NYCC 2009 Wrap Up

It was a tiring three days heading back and forth from Brooklyn to Javitz Center. Saw lots of familiar faces, and many who remembered me and Sketchbot from last year, so that was cool. Everyone loved seeing the revised Sketchbot prototype, and I made some new contacts for working with the manufacturers overseas. Comic Con purchases were extremely minimal for me - two artist's books, one really cool inkjet print from Bob Larkin, and one Ugly Doll action figure from Dave Horvath. Check out this Flickr set for my pictures from the show floor!

Sketchbot Molds, Take 2

After a 2-week hiatus, I was finally able to start thinking about the next step with the Sketchbot prototype pieces - mold making and pulling a few resin casts. Now, I haven't done this since last Summer with the first version of Sketchbot, and I'm hoping to get something together for NYCC (which, incidentally, starts tomorrow). Suffice to say, mold making is not my forte. I don't mind sculpting the initial barriers, but the actual mixing and pouring is the messiest part of this venture. After spending an entire day prepping the pieces, the first molds were done and I proceeded to pour the first test pieces. Bad news - every piece was plauged by air bubbles, existing in both the mold and the casts. Ugh.




Already coming to the conclusion that I'm not going to have anything to show (or sell) by Friday, I figure since I'm already in this mode that I'll simply take another crack at making new molds, this time really paying attention to the seam lines and air vents. This evening, the molds were finished and ready for their test castings. They still exhibited a small amount of bubble holes, but were significantly better than the first run. At this stage, I'm seriously debating on whether or not I'm going to be able to pull off a successful DIY limited edition run, as every piece from here on out will require patching and repairing before painting. The good news? I do have a rock-solid 3d printed prototype that I can shop around and see about having that mass produced professionally. I'll bring those pieces with me to Comic Con, have a good time checking all the stuff out over the weekend, and eventually get a few painted up versions done from this week of tests.



Lots more pictures up on Flickr documenting the week's work.

Sketchbot 3d Prototype - Pieces Finally Arrive!

The Sketchbot 3d printed pieces FINALLY arrived this afternoon. (mental note - USPS "Priority" is an oxymoron)

I am extremely happy with the quality and detail of these! They do require some additional cleanup, and after about an hour of wet sanding to remove the very slight remnants of layering and micro-scratches, they are rock smooth.

The pieces all have a snug fit, though, the more I've been playing around with it, the looser the connections are becoming.

I won't be able to generate molds from this until sometime next week, so please marvel at these photos to tide you over until the next phase begins. :)

Sketchbot 3d Print Progress

How cool is this? Gabriel from Crystalline Models was kind enough to snap a few pictures of the Sketchbot model in mid-print. I would love to see a time lapse of this process. The printer being used is the Objet Eden260V, which has a .00006” layer thicknesses (16 microns).

I'm extremely impressed with the turnaround time. I uploaded the geometry Friday afternoon, the print was finished later that night, then shipped out on Saturday. I could be receiving the pieces as early as tomorrow (Monday), which means I can start creating molds ASAP. Stay tuned...

Sketchbot Revisions Part 2

I've been getting some great feedback over on Flickr, and I agreed with the observation that his legs appeared a bit too thin. I also wasn't entirely happy with the flappy feet and felt they needed to be shorter and more round as exhibited in most of the recent sketches. I also paid considerable attention as to how the limbs would attach to the body, inserting a slightly recessed area on the body so the limbs would inset nicely into their slots while allowing full 360 degree rotation.

I think I also came up with a new logo for the toy line. ;)

Sketchbot Revision Update

NYCC is 4 1/2 weeks away, and I'm feverishly putting the final touches on the revised Sketchbot. The plan is to do a relatively modest run of hand-casted resin figures exclusively for the show. This will also serve as a testbed for having a 3d printout created to use as a master to create a silicon mold from. I'm in the process of finalizing this geometry and will be choosing a 3d print bureau soon to upload the model to. I'll post photos from that result when I get the model, then document the molding and casting process once again. Stay tuned, it's gonna be a busy month!

Sketchbot Turntable from Steve Talkowski on Vimeo.

"Tetsujin 28" Teaser

Because I'm a HUGE fan and avid collector of all things Tetsujin-28/Gigantor, I just had to post these gorgeous images that Felix Ip, Creative Director of IMAGI Animation, recently shared on his blog.  I really hope this project becomes a reality!